The DesignLine Tri-Zone Sensor is versatile, supervised and can be used to monitor garage doors, bay windows and more. Because it’s wireless, it installs easily and features a “tilt” sensor as well as two external contacts. The Tri-Zone will detect and report a low battery or tamper situation to the central station and provide visual verification that a battery needs replacing with Low Battery LED alert.
What It’s Designed to Do
The small, wireless DesignLine Tri-Zone Sensor is designed to provide intrusion detection with three-zone sensing and is perfect for garage doors or bay windows.
- Secures garage doors using “tilt” sensing capability with no magnet required
- Tri-zone sensing easily protects three zones in close proximity to each other, reducing installation time
What It Can Also Do
- Can be used to monitor up to three zones in close proximity
Things to Consider
- Can be programmed when it detects motion to send signal immediately or after up to one minute delay.
|Interlogix (GE) DesignLine Tri-Zone Sensor: Specifications|
|Operating temperature (maximum)||140˚F (60˚C)|
|Operating temperature (minimum)||14˚F (-10˚C)|
|Operating voltage (minimum)||3VDC CR123A lithium battery|
|Enclosure material||ABS PA-765|
|UL rating(s)||UL 634 Level 1|
|FCC standard||Part 15|
|Dimensions (L x W x H)||2.90 x 1.65 x 1.0 in. (73.80 x 42 x 25.50 mm)|
|Battery||CR123A (Panasonic or approved equivalent)|
|Typical battery life||5 years|
|Transmitter frequency tolerance||+/- 8 khz|
|Modulation type||Amplitude shift key (ASK)|
|Unique ID codes||16 million|
|Peak field strength||Typical 40,000 uV/m at 3 meters|